Downloads read more ...
Hany
Mixers
The HÄNY HCM line of high-shear (colloidal) mixers is recognized worldwide for its excellent mixing performance, efficiency and wear resistance.
The HCM mixers will effectively mix water, bentonite, cement, clay, lime and other similar suspensions. Sand up to 8 mm particle size can be added on the smaller models HCM 300 and HCM 600. The mixers can be equipped with a weigh-batching system to automatically batch and mix up to 3 dry components with water.
Agitators
The HRW agitators are used as holding tanks between the HCM batch mixers and the pump. In the slowly revolving agitator, the grout suspensions are homogenized and air bubbles removed.
Grout Pumps
A full range of ZMP Grout Pumps cover almost every grouting requirement.
These low-wear plunger type pumps handle a wide variety of grout mixes from neat cement suspensions to backfill mortar with sand up to 8 mm particle size. All pumps are equipped with the Automatic Pressure Control System (APC).
With the ZMP system, the maximum pressure can be preset on the hydraulic power pack. Whenever the preset pressure is reached, the pump automatically stops and maintains the pressure. The output can also be controlled to adjust the pump to the requirement of the particular work. The ZMP 700 series can be equipped with two different plunger units to cover a wide range of applications. The plunger units can be changed on site within a few minutes.
Pressure and Flow Recording Systems
HÄNY offers two different Recording Systems
The HIR is a simple recording system consisting of two main units:
A. Measuring unit with electromagnetic flow meter pressure transducer. The pressure transducer can be placed within the measuring unit or at the point of injection.
B. Recording unit with a chart recorder for pressure and flow rate as well as a totalizer for the accumulated flow.
Both units are made of stainless steel and well protected against moisture and dust.
The HFR is a sophisticated recording system that records the pressure and flow of up to 6 grout lines simultaneously. The recording data are stored on a PCMCIA Memory Card and can be processed in a WINDOWS program. The pressure is measured by a pressure transducer at the pump or the point of injection. The flow can be measured either by an electromagnetic flow meter or can be integrated from the number of strokes of the grout pump. The stroke counting version is not quite as accurate but it is a very economic solution, especially for multiple hole grouting in conjunction with several small grout pumps ZMP 610 or ZMP 625.
Compact Grout Plants
The INJECTO-COMPACT (IC) Grout Plants consist of:
- an HCM mixer,
- an HRW agitator
- and a ZMP grout pump.
All components are functionally arranged on a common base with a central lifting point. The use of the INJECTO-COMPACT grout plants considerably reduces the installation time on site and requires a minimum of operating personnel.
